{"id":3413,"date":"2024-03-26T14:45:13","date_gmt":"2024-03-26T13:45:13","guid":{"rendered":"https:\/\/www.klasmeier.com\/kalibrierbaeder\/"},"modified":"2026-05-12T15:36:58","modified_gmt":"2026-05-12T13:36:58","slug":"kalibrierbaeder","status":"publish","type":"page","link":"https:\/\/www.klasmeier.com\/en\/shop\/kalibrierbaeder\/","title":{"rendered":"High-quality calibration baths \u2013 minimal measurement uncertainty, maximum stability"},"content":{"rendered":"\n
\n
\"\"<\/figure>\n<\/div>\n\n
\n

Calibration baths for the lowest measurement uncertainties<\/strong><\/strong><\/h1>\n\n\n\n

Large immersion depth with less fill volumethanks to the double-chamber overflow bath design!<\/h2>\n\n\n\n
\n

With ISOTECH calibration baths, you can reliably and highly accurately calibrate<\/strong> your resistance thermometers, thermocouples and<\/strong> your instruments\u2019 temperature sensors<\/strong>. They are highly accurate, stable, versatile, and easy to operate. This makes them indispensable instruments in quality control laboratories, industry, and scientific institutions with the highest requirements. <\/p>\n\n\n\n

An ISOTECH calibration bath can be set very precisely and maintains the desired temperature very stably<\/strong>. Thanks to the double-chamber overflow bath design, the temperature is evenly distributed throughout the entire calibration bath. This prevents hot spots<\/strong> or cold zones<\/strong> and creates a homogeneous temperature environment for the device to be calibrated<\/strong>. Accurate and reproducible measurements and calibrations are therefore guaranteed.<\/strong> <\/p>\n\n\n\n

The calibration baths are used in a temperature range from -80\u00b0C to 300\u00b0C<\/strong>. With an extremely large immersion depth<\/strong> of 470 mm<\/strong> and only 5 l of calibration medium<\/strong>, they are environmentally friendly and extremely cost-effective<\/strong>. <\/p>\n<\/div>\n<\/div>\n\n

\n

Find the ISOTECH calibration bath that is right for you<\/h2>\n\n\n\n

Precision calibration baths for laboratory applications<\/h3>\n\n\n\n
\n
\n
\n

Ultra-stable calibration bath 785<\/a>-80\u00b0C to 300\u00b0CPrecision bath<\/h3>\n<\/div>\n\n\n\n
\n
\n

<\/i><\/mark> The 785 double-chamber calibration bath<\/strong> is available in three different temperature ranges<\/strong>. All models have an immersion depth of 485 mm<\/strong> and, at 50\u00b0C, an absolute stability of up to \u00b10.0025\u00b0C<\/strong> (with water).<\/i><\/mark> The calibration bath is 485 mm deep<\/strong> overall and has an opening 98 mm in diameter<\/strong>.<\/i><\/mark> The double-chamber bath concept is based on the liquid being heated or cooled in the rear section<\/strong> and then flowing upward in the calibration volume<\/strong>, thereby eliminating vertical and axial temperature gradients<\/strong>.<\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n<\/div>\n\n\n\n
\n
Go to calibration bath 785<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n

Hydra calibration bath<\/a>-80\u00b0C to 300\u00b0CImmersion depth 300 mm<\/h3>\n<\/div>\n\n\n\n
\n
\n

<\/i><\/mark> The Hydra double-chamber calibration bath<\/strong> is available in three different temperature ranges<\/strong>. All models have an immersion depth of 300 mm<\/strong> and an absolute stability across<\/strong> the entire temperature range of \u00b10.01\u00b0C<\/strong>.<\/i><\/mark> The Hydra calibration bath operates with only 5 l of calibration medium<\/strong> and is highly economical thanks to fast heating and cooling times<\/strong>.<\/i><\/mark> Convenient calibration volume with an opening of 150 mm in diameter.<\/i><\/mark> The concept of this double-chamber bath is based on the liquid being stirred and cooled in the rear section<\/strong> and then flowing downward in the calibration volume<\/strong>, thereby preventing vertical and axial temperature gradients.<\/strong><\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n<\/div>\n\n\n\n
\n
Go to Hydra calibration bath<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n

Orion calibration bath<\/a>-80\u00b0C to 300\u00b0CImmersion depth 470 mm<\/h3>\n<\/div>\n\n\n\n
\n
\n

<\/i><\/mark> The ORION calibration bath<\/strong> was designed to calibrate thermometers and commission temperature fixed points<\/strong>.<\/i><\/mark> The ORION double-chamber calibration bath is available in<\/strong> three different temperature ranges<\/strong>.<\/i><\/mark> Its design corresponds to that of the smaller Hydra calibration bath. The difference is the greater immersion depth of up to 470 mm<\/strong>. This allows temperature fixed points to be used in addition to long temperature probes. <\/p>\n\n\n\n

The various calibration media represent a major cost factor<\/strong>. As they are consumed and evaporate, they must be replaced regularly. ORION requires only<\/strong> 8.5 liters of calibration medium<\/strong> and can therefore be operated in a<\/strong> cost-effective and economical<\/strong> manner. <\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n<\/div>\n\n\n\n
\n
Go to Orion calibration bath<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n
\n

Portable calibration baths for on-site applications<\/h2>\n\n\n\n
\n
\n
\n

Portable Drago calibration bath<\/a>30\u00b0C to 250\u00b0C<\/h3>\n<\/div>\n\n\n\n
\n
\n

Thanks to its large calibration volume of \u00d8 65 mm<\/strong> and a depth of 160 mm<\/strong>, the ISOTECH Drago block calibrator is very well suited as a portable liquid bath. With a stirred liquid bath, temperature probes of all types, sizes, and shapes can be calibrated<\/strong>. <\/p>\n\n\n\n

<\/i><\/mark> Portable multifunction calibrator \u2013 5 applications in one device*<\/strong><\/i><\/mark> Temperature range 30\u00b0C to 250\u00b0C<\/strong><\/strong><\/i><\/mark> Large calibration volume \u00d8 65 mm, immersion depth 160 mm <\/strong><\/i><\/mark> Calibrate complete measurement chains<\/strong><\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n<\/div>\n\n\n\n
\n
Go to Drago calibration bath<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n

Portable Hyperion calibration bath<\/a>-25\u00b0C to 140\u00b0C<\/h3>\n<\/div>\n\n\n\n
\n
\n

Thanks to its large calibration volume of \u00d8 65 mm<\/strong> and a depth of 160 mm<\/strong>, the Hyperion block calibrator is very well suited as a portable calibration bath. With the stirred calibration bath, you can calibrate temperature probes of all types, sizes, and shapes<\/strong>. <\/p>\n\n\n\n

<\/i><\/mark> Portable multifunction calibrator \u2013 6 applications in one device*<\/strong><\/i><\/mark> Temperature range -25\u00b0C to 140\u00b0C<\/strong><\/i><\/mark> Large calibration volume \u00d8 65 mm, immersion depth 160 mm <\/strong><\/i><\/mark> Calibrate complete measurement chains<\/strong><\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n<\/div>\n\n\n\n
\n
Go to Hyperion calibration bath<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n
\n

Advantages of ISOTECH calibration baths<\/strong><\/h2>\n\n\n\n
\n
\n
\n

<\/i><\/mark><\/p>\n\n\n\n

<\/i><\/mark> Wide temperature range from -80\u00b0C to 300\u00b0C<\/strong><\/i><\/mark> Double-chamber design<\/strong> The liquid is conditioned in the rear section of the bath and then pumped from top to bottom through the calibration volume. This principle enables very small vertical and axial temperature gradients and thus low measurement uncertainties<\/strong>. <\/i><\/mark> Heating and cooling speed<\/strong> 5 l of calibration medium can be heated up and cooled down quickly<\/strong>.<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

<\/i><\/mark><\/p>\n\n\n\n

<\/i><\/mark> Energy efficiency<\/strong>Work faster and save energy costs<\/strong> thanks to only 5 l of calibration medium <\/i><\/mark> Large<\/strong> immersion depth up to 470 mm<\/strong><\/i><\/mark> Stability of \u00b10.0025\u00b0C<\/strong><\/i><\/mark> Temperature fixed points<\/strong> can be used<\/i><\/mark> Control and operation<\/strong>Control panel with easy-to-use controls<\/strong> and a clear display.<\/i><\/mark> Communication option<\/strong> via RS232 interface<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

<\/i><\/mark><\/p>\n\n\n\n

<\/i><\/mark> Safety features<\/strong>Overheat protection, alarms, and emergency shut-offs to ensure the safe use<\/strong> of the calibration bath.<\/p>\n\n\n\n

<\/i><\/mark> Maintenance and reliability<\/strong>The calibration baths operate very reliably. This requires less maintenance<\/strong>, and the devices have a longer service life<\/strong>. <\/p>\n\n\n\n

<\/i><\/mark> Manufacturer and distributor support<\/strong>If issues do occur or you need technical assistance, you have customer support and service<\/strong> here in Germany<\/strong> (Fulda).<\/p>\n\n\n\n

<\/i><\/mark> In many cases, we can carry out any repairs<\/strong> required for the calibration baths in-house<\/strong>.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n

\n
\n
\n

Nicht das richtige Produkt f\u00fcr Sie?<\/h2>\n\n\n\n
\n
-> Hier geht’s zur\u00fcck zur \u00dcbersicht<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Calibration baths for the lowest measurement uncertainties Large immersion depth with less fill volumethanks to the double-chamber overflow bath design! With ISOTECH calibration baths, you can reliably and highly accurately calibrate your resistance thermometers, thermocouples and your instruments\u2019 temperature sensors. They are highly accurate, stable, versatile, and easy to operate. This makes them indispensable instruments […]<\/p>\n","protected":false},"author":4,"featured_media":0,"parent":3420,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-3413","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/pages\/3413","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/comments?post=3413"}],"version-history":[{"count":19,"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/pages\/3413\/revisions"}],"predecessor-version":[{"id":15136,"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/pages\/3413\/revisions\/15136"}],"up":[{"embeddable":true,"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/pages\/3420"}],"wp:attachment":[{"href":"https:\/\/www.klasmeier.com\/en\/wp-json\/wp\/v2\/media?parent=3413"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}