Pt100 IHW
industrial reference thermometer (angled)
-100 °C … 600 °C


Manufacturer: Klasmeier / eXacal
Model: Pt100IHW


Angled reference thermometer for measuring external reference temperatures as temperature standard for dry block calibrators.

  • 90° angled
    The reference thermometer is angled 90°. This creates space for calibrating larger designs such as transmitter heads, thermometers with larger handles
  • Large temperature range
    Reference thermometer can be used in the temperature range from -100 °C to 600 °C
  • Stable pt100 temperature sensors
    Use of highly stable and annealed high-temperature Pt100 measuring resistors


The angled reference thermometer is best calibrated together with the temperature block calibrator. An individual characteristic curve of the angled reference thermometer can be stored into the dry block calibrator.


Questions about the thermometer?

    Additional information

    Select calibration

    inclusive DAkkS Calibration, without DAkkS Calibration

    Technical Data

    Model Pt100IHW
    Temperature range -100 °C … 600 °C
    Nominal resistance Pt100 (100 Ohm)
    Connection type Four-Wire
    Connection cable Temperature resistant – EMF low strands from own production
    Connector Banana plugs
    (or depending on configuration)
    Sheath material Metal
    A* 200 mm
    B* 50 mm
    C* 750 mm
    Handle ∅ 12 mm x 40 mm
    Diameter 6 mm
     Measurement resistor / Temperature sensor
    Length 25 mm
    Recommended measurement current 1 mA
    Self-heating 4 mK

    *Dimensions Pt100IHW: